:: Home Page : Syntaj Duro AD
Food industry, especially meat and fish processing, slaughterhouses, dairies, breweries, chemical industry, kitchens, warehouses, baths, laboratories, etc. Suitable for both dry and humid environments. For indoor use.
SYNTAJ DURO HDM is a coloured floor with anti-slip surface. It is extremely resistant, so it is especially recommended for places requiring a mechanically, chemically and thermally resistant surface
SYNTAJ DURO AD is rated R10-R11 for slip resistance, depending on the application of the sealer layer. When choosing the anti-slip class, consider the user’s safety and the requirements of hygiene standards. The slip resistance rating is indicative.
Reaction to fire with fire classification (EN 13501-1) and mechanical parameter tests in accordance with the European Standard EN 13813. For the purpose of checking chemical resistance, see the table available on request. The product is approved by the PZH (National Institute of Hygiene).
Available in a wide range of RAL and NCS colours.
The seamless floor has no pores. Regular maintenance and cleaning improves the appearance and durability of the floor. It can be cleaned with standard detergents and industrial equipment
|Adhesion||> 10 N/mm2|
|Abrasion resistance||> 30 N/mm2|
|Adhesion to concrete||30 μm|
|Hardness of surface||> 70 N/mm2|
Reaction to fire
|Bfl-s1 (EN 13501-1)|
-15 ̊C - 75 ̊C for 4mm floor thickness
-40 ̊C - 85 ̊C for 6mm floor thickness
|Foot traffic at 20 degrees C||24 hours|
|Fully cured||5 days|
Spilling with water and chemicals should not occur before the floor is fully cured.
SYNTAJ makes every effort to ensure that the information and advice contained in the Product Safety Data Sheets and the System Safety Data Sheets is accurate and correct. This information is provided in accordance with our current state of knowledge and in the best faith to characterize the use of the product and to advise the customer, but does not represent a guarantee of product performance and does not constitute a contract. Syntajhas no control over the selection of its products for particular applications under particular circumstances. It is important for the customer/user to make sure that the product is suitable for a specific use in specific conditions in accordance with applicable regulations. Particular attention must be paid to the nature, composition and temperature of the sub-base as well as the surroundings, both during application/curing and during use. The Company shall not be liable for improper product selection by third parties for a particular use, under specified conditions. All customers and users must read the latest product documentation.