syntaj duro slm

:: Home Page : Syntaj Duro SLM

 

Area of application

 

Food industry, especially meat and fish processing, slaughterhouses, dairies, breweries, chemical industry, kitchens, warehouses, baths, laboratories, etc. Suitable for both dry and humid environments. For indoor use.

 
 

Description

 

SYNTAJ DURO SLM is a coloured polyurethane, water-cement floor with a smooth surface. It is extremely resistant, so it is especially recommended for places requiring surfaces with high mechanical, chemical and thermal resistance.

 
 

Resistance to slipping

 

SYNTAJ DURO SLM has a smooth surface. When choosing the anti-slip class, consider the user’s safety and the hygiene requirements and safety standards.

 

Certificates / approvals

 

The DURO SLM system has been tested in accordance with the European Standard EN 13813 both in terms of mechanical parameters and fire performance (EN 13501-1). The product is approved by the PZH (National Institute of Hygiene).

 
 

 

Colour and design

 

Available in a wide range of RAL and NCS colours.

 
 

Maintenance

 

The seamless floor has no pores. Regular maintenance and cleaning improves the appearance and durability of the floor. It can be cleaned with standard detergents and industrial equipment.

 

 
 

Properties

 
  •  Easy to clean
  •  Matt
  •  Seamless
  •  Non-absorbable
  •  Wear-resistant
  •  Chemical-resistant
  •  Comfortable
  •  Ecological

Technical features

 
Adhesion > 10 N/mm2
Abrasion resistance > 30 N/mm2
Adhesion to concrete 30 μm
Hardness of surface > 70 N/mm2

Impact resistance

20 Nm

Chemical resistance

high

Reaction to fire

Bfl-s1 (EN 13501-1)

Hygienic tests

PZH approval

Adhesion

-15 ̊C - 75 ̊C for 4mm floor thickness

-40 ̊C - 85 ̊C for 6mm floor thickness

  

Cure time

 
Foot traffic at 20 degrees C 24 hours
Fully cured 5 days
 

Spilling with water and chemicals should not occur before the floor is fully cured.

 

 

 

 

Comments

 

SYNTAJ makes every effort to ensure that the information and advice contained in the Product Safety Data Sheets and the System Safety Data Sheets is accurate and correct. This information is provided in accordance with our current state of knowledge and in the best faith to characterize the use of the product and to advise the customer, but does not represent a guarantee of product performance and does not constitute a contract. Syntajhas no control over the selection of its products for particular applications under particular circumstances. It is important for the customer/user to make sure that the product is suitable for a specific use in specific conditions in accordance with applicable regulations. Particular attention must be paid to the nature, composition and temperature of the sub-base as well as the surroundings, both during application/curing and during use. The Company shall not be liable for improper product selection by third parties for a particular use, under specified conditions. All customers and users must read the latest product documentation.

 

 

 

Syntaj

floor

systems

Manufactured using the latest technology and raw materials of the highest quality. SGS Quality Certificate.

Quality certificate SGS

ISO 9001:2008