syntaj eco esd

:: Home Page : Syntaj Eco ESD

 

Area of application

 

Pharmaceutical industry, production areas, clean rooms, food industry, kitchens, bakeries, in public areas - including health care, hospitals, schools, laboratories, penitentiaries, shops, supermarkets, educational facilities, sports facilities, car parks, watchmaking, microelectronic, and mechanical industry, and wherever there is a need to prevent the occurrence of static electricity, etc. For indoor use.

 
 

Description

 

SYNTAJ ECO ESD is a coloured anti-static floor with multiple applications. The floor system is highly resistant to chemicals and wear, and offers the best anti-static protection

 
 

Resistance to slipping

 

Floor surface is rated R10 for slip resistance. When choosing the roughness, consider the user’s safety and the hygiene requirements and safety standards.

 

Certificates / approvals

 

The Eco ESD system has been tested in accordance with the European Standard EN 13813 both in terms of mechanical parameters and reaction to fire (EN 13501-1). The product has been approved by PZH and meets the electric shock protection requirements for personnel handling electrical equipment at voltage up to 250V in accordance with PN-E-05204 and PN-EN 61340-5-1).

 
 

Colour and design

 

SYNTAJ ECO ESD is available in a wide range of RAL and NCS colours.

 


Maintenance

 

The seamless floor has no pores. Regular maintenance and cleaning will improve the appearance and durability of the floor. For washing, it is recommended to use fluids dedicated to anti-static coatings.

 

 
 

Technical features

 
  •  Easy to clean
  •  Wear-resistant
  •  Chemical-resistant
  •  Seamless
  •  Anti-slip
  •  Comfortable
  •  Non-absorbable
  •  Anti-elektrostatic
  •  It meets the requirements of static electricity protection for all operating conditions including explosion hazard zones 0, 1, 2, 20, 21 and 22.
  •  It provides effective antistatic protection when handling electromechanical instruments.
  •  It meets the electric shock protection requirements for personnel handling electrical equipment at voltage up to 250V.

Technical features

 
Abrasion resistance 60 µm
Impact resistance 17 Nm
Chemical resistance high 

Reaction to fire

Bfl-s1 (EN 13501-1:2007)

Hygienic tests

PZH approval

Vapour permeability

The floor is sealed completely by using a metal float.  

Resistance

≤10E6 Ohm

  

Cure time

 
Foot traffic at 20 degrees C 24 hours
Light traffic 2 days
Fully cured 7 days
 

Spilling with water and chemicals should not occur before the floor is fully cured.

 

 

 

 

Comments

 

SYNTAJ makes every effort to ensure that the information and advice contained in the Product Safety Data Sheets and the System Safety Data Sheets is accurate and correct. This information is provided in accordance with our current state of knowledge and in the best faith to characterize the use of the product and to advise the customer, but does not represent a guarantee of product performance and does not constitute a contract. Syntajhas no control over the selection of its products for particular applications under particular circumstances. It is important for the customer/user to make sure that the product is suitable for a specific use in specific conditions in accordance with applicable regulations. Particular attention must be paid to the nature, composition and temperature of the sub-base as well as the surroundings, both during application/curing and during use. The Company shall not be liable for improper product selection by third parties for a particular use, under specified conditions. All customers and users must read the latest product documentation. 

 

 

 

Syntaj

floor

systems

Manufactured using the latest technology and raw materials of the highest quality. SGS Quality Certificate.

Quality certificate SGS

ISO 9001:2008