syntaj lago

:: Home Page : Syntaj Lago


Area of application


Laboratories, clean rooms, pharmaceutical industry, hospitals, rooms with high aesthetic requirements, etc. For indoor use.




SYNTAJ LAGO is a coloured epoxy floor with a smooth surface. The floor system has excellent aesthetic qualities, high resistance to chemicals and wear.


Resistance to slipping


The floor surface is rated R9 for slip resistance. When choosing the anti-slip class, consider the user’s safety and the hygiene requirements and safety standards.


Certificates / Approvals


SYNTAJ LAGO has been tested in accordance with the European Standard EN 13813 both for mechanical resistance and for reaction to fire. The product is approved by the PZH (National Institute of Hygiene).



Colour and Design


SYNTAJ ECO is available in a wide range of RAL and NCS colours.




The seamless floor has no pores. Regular maintenance and cleaning improves the appearance and durability of the floor. To keep the floor clean we recommend Syntaj cleaning agents.




  • Easy to clean
  • Seamless
  • Smooth surface
  • Comfortable
  • Ecological

Technical features

Abrasion resistance AR 0.5
Adhesion to concrete B 2.0
Hardness of surface SH 70
Reaction to fire Cfl-s1 (EN 13501-1)

Impact resistance

IR 20


Cure time

Foot traffic at 20 degrees C 24 hours
Light traffic 2 days
Fully cured 7 days

Spilling with water and chemicals should not occur before the floor is fully cured.







SYNTAJ makes every effort to ensure that the information and advice contained in the Product Safety Data Sheets and the System Safety Data Sheets is accurate and correct. This information is provided in accordance with our current state of knowledge and in the best faith to characterize the use of the product and to advise the customer, but does not represent a guarantee of product performance and does not constitute a contract. Syntajhas no control over the selection of its products for particular applications under particular circumstances. It is important for the customer/user to make sure that the product is suitable for a specific use in specific conditions in accordance with applicable regulations. Particular attention must be paid to the nature, composition and temperature of the sub-base as well as the surroundings, both during application/curing and during use. The Company shall not be liable for improper product selection by third parties for a particular use, under specified conditions. All customers and users must read the latest product documentation.







Manufactured using the latest technology and raw materials of the highest quality. SGS Quality Certificate.

Quality certificate SGS

ISO 9001:2008