syntaj mastik

:: Home Page : Syntaj Mastik

 

Area of application

 

A product for finishing plinths, for repair of various types of cracks, joints and concrete defects. Particularly noteworthy is the unconventional use of this product, namely as the material from which the sculptures byAgataAgatowska are made...

 
 

Description

 

It is a 2-component, epoxy resin based composition; without nonylphenol. MASTIK is a sticky and easy-working agent. The product can be applied both in thin layers and in volume so that it fills holes and cracks.

 
 

Disclaimer

 

It is a 2-component, epoxy resin based composition; without nonylphenol. MASTIK is a sticky and easy-working agent. The product can be applied both in thin layers and in volume so that it fills holes and cracks.

 

Certificates / approvals

 

SYNTAJ Mastikhas been tested in accordance with the European Standard EN 1504-3 - both for mechanical properties and reaction to fire. The product is approved by the PZH (National Institute of Hygiene).

 
 

 

Colour and design

 

Available in a wide range of RAL and NCS colours.

 
 

Maintenance

 

Prior to application, the surface must be cleaned of all loose particles and dust. The surface must be clean and dry.

 

 
 

Properties

 
  •  Decorative
  • Easy to use
  •  Comfortable

Technical features

 
Adhesion to concrete > 2.0 MPa - R3/R4
Abrasion resistance >80 MPa
Capacity 1.06 – 1.16 kg/dm3

Reaction to fire

Efl

  

Cure time

 

Each layer must be applied after drying the previous layer. The cure time is about 12 hours at 20°C. After 24 hours at 20°C you can walk on the surface. After 3 days at 20°C light vehicles can move on the surface. After 7 days at 20°C the product is completely cured. Curing time depends on temperature and humidity.

 

 

 

 

Comments

 

SYNTAJ makes every effort to ensure that the information and advice contained in the Product Safety Data Sheets and the System Safety Data Sheets is accurate and correct. This information is provided in accordance with our current state of knowledge and in the best faith to characterize the use of the product and to advise the customer, but does not represent a guarantee of product performance and does not constitute a contract. Syntajhas no control over the selection of its products for particular applications under particular circumstances. It is important for the customer/user to make sure that the product is suitable for a specific use in specific conditions in accordance with applicable regulations. Particular attention must be paid to the nature, composition and temperature of the sub-base as well as the surroundings, both during application/curing and during use. The Company shall not be liable for improper product selection by third parties for a particular use, under specified conditions. All customers and users must read the latest product documentation.

 

 

 

Syntaj

floor

systems

Manufactured using the latest technology and raw materials of the highest quality. SGS Quality Certificate.

Quality certificate SGS

ISO 9001:2008