syntaj parking os

:: Home Page : Syntaj Parking OS

 

Area of application

 

SYNTAJ PARKING OS is a multi-layer parking system with a crack bridging membrane. The floormeets the requirements of the German standard „Richtlinie fur Schutz- und Instandsetzung von Betonbauwerken des DeutschenAusschusses fur Stahlbeton” within the scope of OS 11a.

 
 

Description

 

Parking surfaces exposed to direct atmospheric conditions. System for surfaces used by pedestrian and vehicle traffic.

 
 

Resistance to slipping

 

Parking surfaces exposed to direct atmospheric conditions. System for surfaces used by pedestrian and vehicle traffic.

 

Certificates / approvals

 

Reaction to fire with fire classification and mechanical tests in accordance with the European StandardEN 13813. The product is approved by the PZH (National Institute of Hygiene).

 
 

 

Colour and design

 

SYNTAJ PARKING OS is available in a wide range of RAL/NCS colours.

 
 

Maintenance

 

The seamless floor has no pores. It is easy to clean. It can be cleaned with standard detergents and equipment used in industry.

 
 

Properties

 
  •  Crack bridging acc. to OS 11a
  •  Abrasion resistance
  •  Wear-resistant
  •  Seamless

Technical features

 
Adhesion > 10 N/mm2
Abrasion resistance > 30 N/mm2
Adhesion to concrete 30 μm
Hardness of surface > 70 N/mm2

Impact resistance

20 Nm

Chemical resistance

high

Reaction to fire

Bfl-s1 (EN 13501-1)

Hygienic tests

PZH approval

Adhesion

-15 ̊C - 75 ̊C for 4mm floor thickness

-40 ̊C - 85 ̊C for 6mm floor thickness

  

Cure time

 
Foot traffic at 20 degrees C 24 hours
Fully cured 5 days
 

Spilling with water and chemicals should not occur before the floor is fully cured.

 

 

 

 

Comments

 

SYNTAJ makes every effort to ensure that the information and advice contained in the Product Safety Data Sheets and the System Safety Data Sheets is accurate and correct. This information is provided in accordance with our current state of knowledge and in the best faith to characterize the use of the product and to advise the customer, but does not represent a guarantee of product performance and does not constitute a contract. Syntajhas no control over the selection of its products for particular applications under particular circumstances. It is important for the customer/user to make sure that the product is suitable for a specific use in specific conditions in accordance with applicable regulations. Particular attention must be paid to the nature, composition and temperature of the sub-base as well as the surroundings, both during application/curing and during use. The Company shall not be liable for improper product selection by third parties for a particular use, under specified conditions. All customers and users must read the latest product documentation.

 

 

 

Syntaj

floor

systems

Manufactured using the latest technology and raw materials of the highest quality. SGS Quality Certificate.

Quality certificate SGS

ISO 9001:2008