syntaj quarzcolor esd

:: Home Page : Syntaj Quarzcolor ESD

 

Area of application

 

Pharmaceutical and medical industry, clean rooms, food industry, kitchens, bakeries, schools, laboratories, hospitals, shops, supermarkets, watchmaking, microelectronic, and mechanical industry, explosive environments. For indoor use.

 
 

Description

 

SYNTAJ QUARZCOLOR ESD is a decorative anti-static epoxy floor with numerous applications. The floor system is highly resistant to chemicals, wear, UV, and it also offers the best static protection.

 
 

Resistance to slipping

 

Surface roughness can be adjusted according to customer's needs. Slip resistance ranges from R9 to R12. When choosing the roughness, consider the user’s safety and the hygiene requirements and safety standards.

 

Certificates / Approvals

 

The QUARZCOLOR ESD system has been tested in accordance with the European Standard EN 13813 both in terms of mechanical parameters and reaction to fire (EN 13501-1). The product has been approved by PZH and meets the electric shock protection requirements for personnel handling electrical equipment at voltage up to 250V in accordance with PN-E-05204 and PN-EN 61340-5-1).

 
 

Colour and design

 

SYNTAJ QUARZCOLOR ESD is available in many colours. The shade of the floor results from a combination of dyed resin mixtures and colour quartz sands. The colours are enhanced with high quality transparent topcoat. The unique floor structure makes the floor exceptional. Welcome to the world of floors with infinite design possibilities!

 
 

Maintenance

 

The seamless floor has no pores. Regular maintenance and cleaning will improve the appearance and durability of the floor. For washing, it is recommended to use fluids dedicated to anti-static coatings.

 

 
 

Properties

 
  • Decorative
  • Easy to clean
  • Wear-resistant
  •  Chemical-resistant
  • Seamless
  • Anti-slip
  •  Anti-elektrostatic
  • Comfortable
  • Ecological

Technical features

 
 Abrasion resistance  < 35 µm
Adhesion to concrete > 2.0 N/mm2
Impact resistance 20 Nm
Reaction to fire Cfl-s1 (EN 13501-1:2007)
Hygienic tests atest PZH
Anti-slip resistance R10 - R12

  

Cure time

 
Foot traffic at 20 degrees C 24 hours
Light traffic 2 days
Fully cured 7 days
 

Spilling with water and chemicals should not occur before the floor is fully cured.

 

 

 

 

Comments

 

SYNTAJ makes every effort to ensure that the information and advice contained in the Product Safety Data Sheets and the System Safety Data Sheets is accurate and correct. This information is provided in accordance with our current state of knowledge and in the best faith to characterize the use of the product and to advise the customer, but does not represent a guarantee of product performance and does not constitute a contract. Syntajhas no control over the selection of its products for particular applications under particular circumstances. It is important for the customer/user to make sure that the product is suitable for a specific use in specific conditions in accordance with applicable regulations. Particular attention must be paid to the nature, composition and temperature of the sub-base as well as the surroundings, both during application/curing and during use. The Company shall not be liable for improper product selection by third parties for a particular use, under specified conditions. All customers and users must read the latest product documentation.

 
 

Syntaj

floor

systems

Manufactured using the latest technology and raw materials of the highest quality. SGS Quality Certificate.

Quality certificate SGS

ISO 9001:2008