:: Home Page : Syntaj Quarzcolor
Pharmaceutical industry, clean rooms, food industry, kitchens, bakeries, schools, laboratories, hospitals, shops, supermarkets, warehouses, precision, electronic, mechanical industry etc. For indoor use.
SYNTAJ QUARZCOLOR is a quartz decorative floor based on epoxy resin, with numerous applications. The system is highly resistant to chemical agents, has increased mechanical strength and UV resistance.
Surface roughness can be adjusted according to customer's wishes. The anti-slip class is between R10 and R12. When choosing the anti-slip class, consider the user’s safety and the hygiene requirements and safety standards.
Quarzcolorhas been tested in accordance with the European Standard EN 13813 both for mechanical resistance and for reaction to fire. The product is approved by the PZH (National Institute of Hygiene).
SYNTAJ QUARZCOLOR is available in many colours. The shade of the floor results from a combination of dyed resin mixtures andcolour quartz sands. The colours are enhanced with high quality transparent topcoat. The unique floor structure makes the floorexceptional. Welcome to the world of floors with infinite design possibilities!
The seamless floor has no pores. Regular maintenance and cleaning improves the appearance and durability of the floor. It can be cleaned with standard detergents and industrial equipment.
|Abrasion resistance||< 20 µm|
|Adhesion to concrete||> 2.0 N/mm2|
|Impact resistance||20 Nm|
|Reaction to fire||Bfl-s1 (EN 13501-1)|
|Hardness of surface||>50 N/mm2|
|Chemical resistance||CR10, CR11, CR12|
|Anti-slip resistance||R10 - R12|
|Foot traffic at 20 degrees C||24 hours|
|Light traffic||2 days|
|Fully cured||7 days|
Spilling with water and chemicals should not occur before the floor is fully cured.
SYNTAJ makes every effort to ensure that the information and advice contained in the Product Safety Data Sheets and the System Safety Data Sheets is accurate and correct. This information is provided in accordance with our current state of knowledge and in the best faith to characterize the use of the product and to advise the customer, but does not represent a guarantee of product performance and does not constitute a contract. Syntajhas no control over the selection of its products for particular applications under particular circumstances. It is important for the customer/user to make sure that the product is suitable for a specific use in specific conditions in accordance with applicable regulations. Particular attention must be paid to the nature, composition and temperature of the sub-base as well as the surroundings, both during application/curing and during use. The Company shall not be liable for improper product selection by third parties for a particular use, under specified conditions. All customers and users must read the latest product documentation.